Mongodb compass- host and port provided is not work

Kenth_31619 · November 21, 2018, 2:40am

Host and port given is wrong ?

Mongodb is not start up at the host and port provided

cagaozer · November 21, 2018, 5:32am

It actually worked fine for me.
Are you able to confirm that you’re not behind a firewall and can make connections outgoing to 27017?
If not I suggest you copy/paste the address etc to make sure you have them correct.
Hope that helps.

kanikasingla · November 21, 2018, 8:51am

Hi Kenth,

Please take a look at this post here.

Let me know if it still doesn’t work.

Kanika

Kenth_31619 · November 22, 2018, 5:36am

Hi,

i still facing the same issue.
i did try to ping to the server provided. It show me as below

as well as i did on this, as below

Kenth_31619 · November 23, 2018, 1:55am

Hi,

Any updates on this issue ?

Thanks

kanikasingla · November 23, 2018, 8:34am

Hi Kenth_31619,

Sorry for late response.

Here are some checks you can do to make sure everything is right!

Are you on the latest version of Compass i.e 1.16.1 ? If not, download it here
Try connecting to our cluster through mongo shell. I am assuming you have mongo installed, if not install MongoDB enterprise edition here
Run mongo command from your command line:

mongo “mongodb://cluster0-shard-00-00-jxeqq.mongodb.net:27017,cluster0-shard-00-01-jxeqq.mongodb.net:27017,cluster0-shard-00-02-jxeqq.mongodb.net:27017/test?replicaSet=Cluster0-shard-0” --authenticationDatabase admin --ssl --username m001-student --password m001-mongodb-basics

Let me know if it works!

Kanika

Kenth_31619 · November 26, 2018, 1:16am

Hi,

It seem like the connection issue again.
Please find the result as attached below.

kanikasingla · November 26, 2018, 10:40am

Hi Kenth_31619,

Seems like your network is blocking the requests. Make sure by doing ping cluster0-shard-00-00-jxeqq.mongodb.net.

Also, for details, check here.

Kanika

Kenth_31619 · November 27, 2018, 12:06am

Hi,

Please find the result as per attached below:

kanikasingla · November 27, 2018, 8:54am

Have you tried telnet and everything else?

ping cluster0-shard-00-00-jxeqq.mongodb.net . If you are able to ping then try to see if you can reach the cluster via tracert
tracert cluster0-shard-00-00-jxeqq.mongodb.net . If tracert shows that you can reach the server, then try telnet. On Mac, you can tracert using
Launch Network Utility -> Click on Traceroute -> Enter cluster0-shard-00-00-jxeqq.mongodb.net -> Click Trace. If it looks like this, means you can access the cluster.

Screen Shot 2018-10-16 at 3.08.28 PM.png1352x862 121 KB

telnet cluster0-shard-00-00-jxeqq.mongodb.net 27017. If you are able to connect via telnet then check if there is no white spaces added to the fields.

~$ telnet cluster0-shard-00-00-jxeqq.mongodb.net 27017
Trying 34.195.121.130...
Connected to ec2-34-195-121-130.compute-1.amazonaws.com.

Also, can you go to your browser and try http://cluster0-shard-00-00-jxeqq.mongodb.net:27017/ . The output should be:
It looks like you are trying to access MongoDB over HTTP on the native driver port.
If you get the above message, then that means you can access Atlas.

If you have, please copy/paste this command directly and wait for it to connect:

mongo “mongodb://cluster0-shard-00-00-jxeqq.mongodb.net:27017,cluster0-shard-00-01-jxeqq.mongodb.net:27017,cluster0-shard-00-02-jxeqq.mongodb.net:27017/test?replicaSet=Cluster0-shard-0” --authenticationDatabase admin --ssl --username m001-student --password m001-mongodb-basics

Also check for double quotes if you get any syntax error or so.

Kanika

Troy_30702 · January 13, 2019, 8:49pm

Yes MongoShell works for me, not COMPASS